Sign In | Join Free | My chinacomputerparts.com
China DongGuan Q1-Test Equipment Co., Ltd. logo
DongGuan Q1-Test Equipment Co., Ltd.
Professional Supplier of Climatic Testing Equipment
Site Member

8 Years
Home > Material Testing Machine >

Hydraulic Control Pressure 30T Manual Heat Press CREE-6014H

Product Categories
DongGuan Q1-Test Equipment Co., Ltd.
Contact Now

Hydraulic Control Pressure 30T Manual Heat Press CREE-6014H

Brand Name : iqualitrol

Model Number : CREE-6014H

MOQ : 1 Set

Payment Terms : T/T

Supply Ability : 20 Sets/Month

Delivery Time : 10 Working Days

Packaging Details : Plywood Box

Model : CREE-6014H

Heating rate : RT～160℃, about 15min

Temperature range : RT-250℃

Plate dimension : 250*250mm

Cooling type : Nature cooling

Cylinder stroke : Max 100mm

Contact Now


Manual Heat Press CREE-6014H

Flatbed vulcanizing machine is used in pressing and molding all kinds of rubber model products and non-model products, and can also be used to press all kinds of thermosetting plastics and foam rubber and plastic products.

It has an independent power mechanism and electrical system, and is centrally controlled by buttons. The working pressure and heating temperature can be adjusted within a certain range. This model is manual type.

Technical Specifications:

Model

CREE-6014H
Capacity30T
Pressure GaugeHydraulic gauge manual pressure control
Plate dimension250*250mm
Hot platen materialHigh-temperature resistant steel plate, surface carbonization quenching, special treatment fast thermal conduction, pressure parallel and undeformed, wear-resistant
Plate hardness50～60HRC
Plate flatness≤0.03mm
Plate Parallelism≤0.06mm
Temperature rangeRT-250℃
Temperature uniformity1.5℃
Temp controller2 Omron temperature controllers
Temperature control modePID self-tuning with high-precision sensor, temperature control accuracy: ±1.0°C
TimerLED display, time range 0.1S～99min～9.9hr
HeaterBuilt-in cylindrical type of heating mold [according to the area of the platen is configured with different powers, the temperature of the packaging platen is uniform, not the same power]
Heating timeRT～160℃, about 15min
Two hot platesThe temperature of hot plate can be set separately
Heating modeElectric heating
Cooling modeNature cooling
Hydraulic systemHydraulic control system, oil pump drive and 4-column guide piston to perform the test, with stable pressure, strong load force, and stable lifting; Pressure retention, pressure relief. convenience, and other advantages.
Structure4-column guide piston
Cylinder strokeMax 100mm
Cylinder rate5mm/s
Pressure gauge0～200kg/sq.cm
Mold opening methodRise and fall
Over-temperature protectionyes
Safety device4
Matching mold frame [optional]Customized, optional
dimension(W×D×H) 650*550*600 mm
Power supply3∮, AC220V
Weight≈280kg

Equipment installation needs:

1. Installation site
The ground is flat, the ventilation is good, there is no strong vibration around the equipment, no strong electromagnetic field around the equipment, no flammable, explosive, corrosive substances and dust around the equipment, and there is appropriate space for use and maintenance around the equipment, as shown in the figure below:

External temperature: 27C±3C; relative humidity: ≤85% ; Air pressure: 86KPA~106KPA
There should be space around the equipment for easy maintenance,

2. Gas supply requirements:
At least one air source of 6KG or more.


China Hydraulic Control Pressure 30T Manual Heat Press CREE-6014H factory

Hydraulic Control Pressure 30T Manual Heat Press CREE-6014H Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: DongGuan Q1-Test Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like